Error code
Samsung range error code All other error codes
Samsung range error code All other error codes: Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs everything else here. Every spelling Samsung publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code All other error codes, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
All other error codes
Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs everything else here. That is worth saying plainly rather than filling in: the code on your display is real, it means something to the appliance, and the manufacturer has not published what. The general procedure below is theirs. Anything beyond it is a measurement.
or call (305) 506-1256
What it narrows down to
the code is real, and Samsung publishes no procedure for it
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the cookware, not the appliance
not an error — a burner or element is still on
the divider that turns one oven into two
the door is not being seen as closed
not an error — the appliance is in showroom mode and will not heat
the appliance is not properly connected to its supply
usually the test, not the oven
the vent behind the cooktop is blocked
two boards inside the appliance have stopped agreeing
The same digits mean different things on different equipment. Search the full code list
In more detail
About Samsung range error code All other error codes
What All other error codes means on this make
Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs everything else here. That is worth saying plainly rather than filling in: the code on your display is real, it means something to the appliance, and the manufacturer has not published what. The general procedure below is theirs. Anything beyond it is a measurement.
The other ways Samsung prints this one
All other error codes · Err
Samsung publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with. They mean the same thing and they are one page here, so whichever of them you searched for, this is the right page.
Where this appears, and why not to clear it
On the appliance's own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Turn the range off at the power button and on again.
- If the code returns, switch the breaker off for thirty seconds and back on.
- Write down the exact characters, and note what the appliance was doing at the time.
- If it returns a third time, it is a diagnostic visit — and the code you wrote down is the most useful thing you can hand over.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 506-1256 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards