Error code
Samsung range error code bAd LinE
Samsung range error code bAd LinE: The range is telling you its power connection is not right. Every spelling Samsung publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code bAd LinE, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
bAd LinE
The range is telling you its power connection is not right. On a 240-volt appliance that usually means one leg of the supply is missing or the connection at the terminal block is loose — which is why an oven with this code can still light its display and still fail to heat. It is electrical work at the connection rather than a repair inside the appliance, and it is not a job to improvise.
or call (305) 506-1256
What it narrows down to
the appliance is not properly connected to its supply
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
the cookware, not the appliance
not an error — a burner or element is still on
the divider that turns one oven into two
the door is not being seen as closed
not an error — the appliance is in showroom mode and will not heat
usually the test, not the oven
the vent behind the cooktop is blocked
two boards inside the appliance have stopped agreeing
the code is real, and Samsung publishes no procedure for it
The same digits mean different things on different equipment. Search the full code list
In more detail
About Samsung range error code bAd LinE
What bAd LinE means on this make
The range is telling you its power connection is not right. On a 240-volt appliance that usually means one leg of the supply is missing or the connection at the terminal block is loose — which is why an oven with this code can still light its display and still fail to heat. It is electrical work at the connection rather than a repair inside the appliance, and it is not a job to improvise.
Where this appears, and why not to clear it
On the appliance's own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Do not keep trying to use it. A loose connection on a 240-volt appliance gets hot.
- Have the connection at the appliance and at the breaker checked by someone qualified.
- If it was recently installed or moved, say so — that is when this appears.
Where this goes next
The job this usually becomes is appliance control board repair, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 506-1256 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards