Error code
Samsung dryer error code All other errors
Samsung dryer error code All other errors: Samsung says that a dryer code outside its published list usually relates to the machine's sensors and components, and gives one general procedure rather than pretending to specifics it has not published. Every spelling Samsung publishes for it, which machines can raise it, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code All other errors, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
All other errors
Samsung says that a dryer code outside its published list usually relates to the machine's sensors and components, and gives one general procedure rather than pretending to specifics it has not published. We take the same position: the code is real, we can tell you it is real, and what it is takes a measurement.
or call (305) 506-1256
What it narrows down to
sensors and components, without a published procedure
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the dryers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The supply reaching the dryer is not what it expects
The panel reads a button as permanently pressed
The door, its latch, or the switch that watches them
The temperature the dryer is measuring is not what it should be
The dryer is not reaching the heat it asked for
The boards inside the dryer have stopped agreeing
The supply frequency is not one the machine accepts
The load is taking longer to dry than the machine allows
The burner did not light when it was asked to
the frequency error, in lights
a button read as held down
the boards have stopped talking
The same digits mean different things on different equipment. Search the full code list
In more detail
About Samsung dryer error code All other errors
What All other errors means on this make
Samsung says that a dryer code outside its published list usually relates to the machine's sensors and components, and gives one general procedure rather than pretending to specifics it has not published. We take the same position: the code is real, we can tell you it is real, and what it is takes a measurement.
Where this appears, and why not to clear it
On the appliance's own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.
What to do about it
- Power the dryer off for two to three minutes, power it back on and restart the cycle.
- Note the exact characters and at what point in the cycle they appear.
- If it returns, it is a diagnostic visit rather than a part.
Where this goes next
The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 506-1256 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards