---
title: "Samsung washer error code 3E"
description: "Samsung washer error code 3E: The machine is reporting that the drive motor is not doing what it was told."
url: "https://samsungmiami.support/error-codes/washer-motor/"
date_modified: "2026-09-04"
Appliance type: "Washers"
---


# Samsung washer error code 3E

### What 3E means on this make

The machine is reporting that the drive motor is not doing what it was told. Samsung lists this among the conditions it publishes no specific procedure for, which is honest: a motor code covers the motor itself, its control board and the wiring between them, and telling those apart is a measurement rather than a guess. On some models 3E is a voltage error instead, and Samsung says to check the manual for the model.

### The other ways Samsung prints this one

3E · 3C · E3 · 1 3C

Samsung publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with. They mean the same thing and they are one page here, so whichever of them you searched for, this is the right page.

### Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Switch the washer off for two to three minutes, power it back on and restart the cycle. Samsung publishes no procedure beyond this for these conditions, and neither will we.
- Note whether the code returns immediately or only during a particular part of the cycle. That single observation narrows it more than anything else you can do.
- If it returns, this is a measured diagnosis rather than a part swap, and it is what a diagnostic visit is for.

### Where this goes next

The job this usually becomes is [appliance control board repair](/services/appliance-control-board-repair/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

What this one means

What 3E means on this make

The machine is reporting that the drive motor is not doing what it was told. Samsung lists this among the conditions it publishes no specific procedure for, which is honest: a motor code covers the motor itself, its control board and the wiring between them, and telling those apart is a measurement rather than a guess. On some models 3E is a voltage error instead, and Samsung says to check the manual for the model.

The other ways Samsung prints this one

3E · 3C · E3 · 1 3C

Samsung publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with. They mean the same thing and they are one page here, so whichever of them you searched for, this is the right page.

Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Switch the washer off for two to three minutes, power it back on and restart the cycle. Samsung publishes no procedure beyond this for these conditions, and neither will we.

Note whether the code returns immediately or only during a particular part of the cycle. That single observation narrows it more than anything else you can do.

If it returns, this is a measured diagnosis rather than a part swap, and it is what a diagnostic visit is for.

Where this goes next

The job this usually becomes is appliance control board repair, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

---

**[Read full article: Samsung washer error code 3E](https://samsungmiami.support/error-codes/washer-motor/)**