---
title: "Samsung washer: Unbalanced load"
description: "Samsung washer unbalanced — samsung washer: Unbalanced load: samsung washer — reported by blinking lights rather than by a code."
url: "https://samsungmiami.support/error-codes/washer-lights-unbalanced-load/"
date_modified: "2026-09-04"
Appliance type: "Washers"
---


# Samsung washer: Unbalanced load

### What the appliance is actually reporting

The most common of these and the one least likely to be the machine. Redistribute the laundry and try the spin again; if it happens with ordinary loads, the suspension or the leveling is what to look at.

### Where this appears, and why not to clear it

On the cycle lights, on a machine with no digital display. Samsung publishes what each combination means, and on those models the combination is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off. Samsung adds one caution of its own and it saves service calls: on some models the lights blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

### Which machines this one applies to

Models with no digital display, which report by blinking their cycle lights. Samsung itself flags that several of its codes mean two different things depending on the model — *dC*, *3E* and *BE2* on washers, and *1E* on dishwashers — so the model number is what settles which reading applies to your machine. It also publishes nothing at all for freezers, ice makers and range hoods, which is why those appliances have symptom pages here and no code pages.

### What to do about it

- Open the door, untangle the load and spread it round the drum.
- Close the door and restart the spin.
- If normal loads do it too, check the machine is level and does not rock.
- A level machine that still cannot spin an ordinary load needs its suspension looked at.

### Where this goes next

The job this usually becomes is [washer spin and balance repair](/services/washer-spin-and-balance-repair/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

Models with no digital display, which report by blinking their cycle lights

What the lights are telling you

What the appliance is actually reporting

The most common of these and the one least likely to be the machine. Redistribute the laundry and try the spin again; if it happens with ordinary loads, the suspension or the leveling is what to look at.

Where this appears, and why not to clear it

On the cycle lights, on a machine with no digital display. Samsung publishes what each combination means, and on those models the combination is the entire diagnosis — it disappears the moment the power is cut. Write it down or photograph the panel before switching anything off. Samsung adds one caution of its own and it saves service calls: on some models the lights blink to show cycle status, so treat it as an error only if the machine is misbehaving as well.

Which machines this one applies to

Models with no digital display, which report by blinking their cycle lights. Samsung itself flags that several of its codes mean two different things depending on the model — dC, 3E and BE2 on washers, and 1E on dishwashers — so the model number is what settles which reading applies to your machine. It also publishes nothing at all for freezers, ice makers and range hoods, which is why those appliances have symptom pages here and no code pages.

What to do about it

Open the door, untangle the load and spread it round the drum.

Close the door and restart the spin.

If normal loads do it too, check the machine is level and does not rock.

A level machine that still cannot spin an ordinary load needs its suspension looked at.

Where this goes next

The job this usually becomes is washer spin and balance repair, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

---

**[Read full article: Samsung washer: Unbalanced load](https://samsungmiami.support/error-codes/washer-lights-unbalanced-load/)**