---
title: "Samsung range error code All other error codes"
description: "Samsung range error code All other error codes: Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs…"
url: "https://samsungmiami.support/error-codes/range-other/"
date_modified: "2026-09-04"
Appliance type: "Cooktops, Ranges, Wall ovens"
---


# Samsung range error code All other error codes

### What All other error codes means on this make

Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs everything else here. That is worth saying plainly rather than filling in: the code on your display is real, it means something to the appliance, and the manufacturer has not published what. The general procedure below is theirs. Anything beyond it is a measurement.

### The other ways Samsung prints this one

All other error codes · Err

Samsung publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with. They mean the same thing and they are one page here, so whichever of them you searched for, this is the right page.

### Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Turn the range off at the power button and on again.
- If the code returns, switch the breaker off for thirty seconds and back on.
- Write down the exact characters, and note what the appliance was doing at the time.
- If it returns a third time, it is a diagnostic visit — and the code you wrote down is the most useful thing you can hand over.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

What this one means

What All other error codes means on this make

Samsung lists in this article only the range and wall oven codes it has troubleshooting for, and directs everything else here. That is worth saying plainly rather than filling in: the code on your display is real, it means something to the appliance, and the manufacturer has not published what. The general procedure below is theirs. Anything beyond it is a measurement.

The other ways Samsung prints this one

All other error codes · Err

Samsung publishes a condition and then every string that can stand for it, and which one your machine shows depends on the panel it was built with. They mean the same thing and they are one page here, so whichever of them you searched for, this is the right page.

Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Turn the range off at the power button and on again.

If the code returns, switch the breaker off for thirty seconds and back on.

Write down the exact characters, and note what the appliance was doing at the time.

If it returns a third time, it is a diagnostic visit — and the code you wrote down is the most useful thing you can hand over.

Where this goes next

The job this usually becomes is diagnostic visit, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

---

**[Read full article: Samsung range error code All other error codes](https://samsungmiami.support/error-codes/range-other/)**