---
title: "Samsung range error code C-F0"
description: "Samsung range error code C-F0: The electronics inside the range cannot talk to each other."
url: "https://samsungmiami.support/error-codes/range-cf0/"
date_modified: "2026-09-04"
Appliance type: "Ranges, Wall ovens"
---


# Samsung range error code C-F0

### What C-F0 means on this make

The electronics inside the range cannot talk to each other. Samsung publishes something specific and genuinely useful about this one: on the induction range models NSI6D*9100, NSI6D*9300 and NSI6D*9500 there is a software update that resolves it without a service visit at all. The route is a power reset to clear the code, then connecting the range to SmartThings, then restarting the range so it takes the update. If your model is one of those, that is worth an evening before it is worth a technician.

### Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

### What to do about it

- Reset power to the range so the code clears temporarily.
- Check whether your model is one of the three induction ranges Samsung names for the software fix.
- If it is, connect the range to SmartThings and restart it from the settings menu so the update installs.
- If it is not one of those models, or the code returns after the update, the boards and the harness between them need measuring.

### Where this goes next

The job this usually becomes is [smart diagnosis and firmware service](/services/smart-diagnosis-and-firmware-service/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

Communication error

What this one means

What C-F0 means on this make

The electronics inside the range cannot talk to each other. Samsung publishes something specific and genuinely useful about this one: on the induction range models NSI6D*9100, NSI6D*9300 and NSI6D*9500 there is a software update that resolves it without a service visit at all. The route is a power reset to clear the code, then connecting the range to SmartThings, then restarting the range so it takes the update. If your model is one of those, that is worth an evening before it is worth a technician.

Where this appears, and why not to clear it

On the appliance’s own display. Samsung reports errors two ways: machines with a digital display show a code, and the same machines without one blink their cycle lights instead. Both are published by the maker and both are on this site. Photograph what the panel shows before cutting the power — Samsung asks for this itself on its refrigerator and dishwasher pages, and it is the one thing that makes a first visit more useful. A code that has been reset is information a technician no longer has.

What to do about it

Reset power to the range so the code clears temporarily.

Check whether your model is one of the three induction ranges Samsung names for the software fix.

If it is, connect the range to SmartThings and restart it from the settings menu so the update installs.

If it is not one of those models, or the code returns after the update, the boards and the harness between them need measuring.

Where this goes next

The job this usually becomes is smart diagnosis and firmware service, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 506-1256](tel:+13055061256) and describe what the panel is doing before booking anything.

---

**[Read full article: Samsung range error code C-F0](https://samsungmiami.support/error-codes/range-cf0/)**